Chkuser 2.0 manual editing

Manual editing is a very simple operation.

Watching the patch design, shown in the patch design page, you may see that only some simple changes must be done to qmail-smtpd.c and Makefile.

Backup

Save you qmail working sources before making any change.

Basic installation

Download the newest release.tar package and untar it. It will create a directory containing all chkuser files and patches.

Position in the qmail/netqmail source directory:

$ cd /usr/.../netqmail-1.05

Copy all the chkuser sources:

$ cp /path_to_release_tar/chkuser* .

edit qmail-smtpd.c

within qmail-smtpd.c, change the following lines:

At the end of initial #include declarations, add the following (blue) lines:

#include "timeoutwrite.h"
#include "commands.h"

/* start chkuser code */
#include "chkuser.h"
/* end chkuser code */

#define MAXHOPS 100

Within smtp_mail routine, add the following blue lines

void smtp_mail(arg) char *arg;
{
if (!addrparse(arg)) { err_syntax(); return; }
/* start chkuser code */
if (chkuser_sender (&addr) != CHKUSER_OK) { return; }
/* end chkuser code */
flagbarf = bmfcheck();

Within smtp_rcpt routine, delete the following red lines and substitute them with the blue ones:

  if (relayclient) {
    --addr.len;
    if (!stralloc_cats(&addr,relayclient)) die_nomem();
    if (!stralloc_0(&addr)) die_nomem();
  }
  else
    if (!addrallowed()) { err_nogateway(); return; }

/* start chkuser code */
  switch (chkuser_realrcpt (&mailfrom, &addr)) {
    case CHKUSER_KO:
      return;
      break;
    case CHKUSER_RELAYING:
      --addr.len;
      if (!stralloc_cats(&addr,relayclient)) die_nomem();
      if (!stralloc_0(&addr)) die_nomem();
      break;
}
/* end chkuser code */

if (!stralloc_cats(&rcptto,"T")) die_nomem();
if (!stralloc_cats(&rcptto,addr.s)) die_nomem();
if (!stralloc_0(&rcptto)) die_nomem();

edit Makefile

Within Makefile, change or add the following lines.

At the beginning of the file:

# Don't edit Makefile! Use conf-* for configuration.


VPOPMAIL_HOME=/home/vpopmail
SMTPD_CHKUSER_OBJ=chkuser.o dns.o
VPOPMAIL_LIBS=`head -1 $(VPOPMAIL_HOME)/etc/lib_deps` `cat dns.lib`

SHELL=/bin/sh

Be careful to use the right path, if your vpopmail production home path is NOT "/home/vpopmail".

dns.lib is added to qmail-smtpd building instructions, so, if you have previously patched qmail-smtpd in order to include dns.lib, take care to delete the duplication from the previous lines.

Before "clean:" insert the chkuser.o definition:

exit.h auto_spawn.h
      ./compile chkspawn.c


chkuser.o: \
compile chkuser.c chkuser.h chkuser_settings.h
      ./compile chkuser.c

clean: \

Beware: the "./compile chkuser.c" line has an heading TAB.

Change the qmail-smtpd compiling and linking instructions, deleting the red lines and adding the blue ones.

qmail-smtpd: \
load qmail-smtpd.o rcpthosts.o commands.o timeoutread.o \
timeoutwrite.o ip.o ipme.o ipalloc.o control.o constmap.o received.o \
date822fmt.o now.o qmail.o cdb.a fd.a wait.a datetime.a getln.a \
open.a sig.a case.a env.a stralloc.a alloc.a substdio.a error.a str.a \
fs.a auto_qmail.o socket.lib
fs.a auto_qmail.o socket.lib $(SMTPD_CHKUSER_OBJ)
      ./load qmail-smtpd rcpthosts.o commands.o timeoutread.o \
      ./load qmail-smtpd $(SMTPD_CHKUSER_OBJ) rcpthosts.o commands.o timeoutread.o \
      timeoutwrite.o ip.o ipme.o ipalloc.o control.o constmap.o \
      received.o date822fmt.o now.o qmail.o cdb.a fd.a wait.a \
      datetime.a getln.a open.a sig.a case.a env.a stralloc.a \
      alloc.a substdio.a error.a str.a fs.a auto_qmail.o `cat \
      socket.lib`
      alloc.a substdio.a error.a str.a fs.a auto_qmail.o \
      $(VPOPMAIL_LIBS) \
      `cat socket.lib`

Beware: all the lines starting from and following "./load" have an heading TAB.

edit TARGETS

Append the following blue line at the end of TARGETS file:

man
setup
check
chkuser.o

edit conf-cc

Edit conf-cc, adding the include path of production vpopmail:

cc -O2 -I/home/vpopmail/include 

Be careful to use the right path, if your vpopmail production home path is NOT "/home/vpopmail".

chkuser settings

Edit chkuser_settings.h, uncommenting the options you prefer, and commenting the ones you don't want. Default settings should cover the most of situations.

Before version 5.3.25, vpopmail used the function vget_real_domain() to get the real name of a domain (useful if rcpt domain is aliasing another domain).
From version 5.3.25, this call is not available and has been substituted by other calls.

• #define CHKUSER_ENABLE_VGET_REAL_DOMAIN must be enabled if vpopmail version < 5.3.25
• #define CHKUSER_ENABLE_VGET_REAL_DOMAIN must be disabled if vpopmail version => 5.3.25

See the related settings pages for more informations.

Make

Now, make (or gmake on *BSD) as your usual. No errors (just warnings) should come out. If you see any error, check carefully edited lines.

Checking

Select a domain, contained in your rcpthosts, for which bouncing is enabled, and run:

$ ./qmail-smtpd
mail from <wrong_sender>
mail from <right_sender>
rcpt to: <fake_user@your_domain>
rcpt to: <real_user@your_domain>

You should see error and ok messages, depending on the addresses you typed.

Install

Copy the new executable in the /var/qmail/bin directory.

This patched qmail-smtpd must be executed in a different way than the normal one. See the running pages for detailed instructions.